Go to the table of contents.



REFERENCES

Ackoff, R. L. (1981). Creating the Corporate Future, New York, NY: Wiley.

Adamsson, N. (2005). Mechatronics Engineering. Licentiate thesis, Department of Machine Design, Royal Institute of Technology, Stockholm, Sweden.

Aganovic, D. (2004). On Manufacturing System Development in the Context of Concurrent Engineering. PhD thesis, KTH.

Aganovic, D., Bjelkemyr, M., Lindberg, B. (2003). Applicability of Engineering Design Theories on Manufacturing System Design in the Context of Concurrent Engineering. CIRP, Grenoble, 2003. [pdf]

Aganovic, D., Nielsen, J., Fagerström, J., Clausson, L., Falkman, P. (2002). A Concurrent Engineering Information Model Based on the STEP Standard and the Theory of Domains. International Design Conference – Design 2002, Dubrovnik, May 14-17. [pdf]

Andersson, F. (2003). The Dynamics of Requirements and Product Concept Management. Doctoral Thesis, Division of Product and Production Development, Chalmers University of Technology, Göteborg, Sweden.

Andersson, F., Nilsson, P., Johannesson, H. (2000). Computer-based Requirement and Concept Modelling – Information Gathering and Classification. Paper No DETC2000/DTM-14561, ASME Design Engineering Technical Conference, September 10-13, 2000, Baltimore, Maryland. [pdf]

Andersson, F., Sutinen, K., Malmqvist, J. (2003) Product Model for Requirements and Product Concept Management: Representing Design Alternatives and Rationale. Paper presented at the 13th Annual International Symposium INCOSE 2003, Washington DC, July 1-3.

Andreasen, M. M. (1980). Syntesemetoder på Systemgrundlag – Bidrag till konstruktionsteori. Dissertation, Lund University. (In Danish).

Arndt, H., Feldkamp, F., Heinrich, M., Meyer-Gramann, K. D. (2000). System Design for Reusability – Task, Current State, and Future Research. Proceedings of the ECAI 2000 Workshop, pp. 13-18. [pdf]

Berglund, F., Claesson, A. (2005) Utilising the concept of a design’s bandwidth to achieve product platform effectiveness. International Conference on Engineering Design (ICED), August 15-18, Melbourne Australia. [paper?]

Blackenfelt, M. (2001). Managing Complexity by Product Modularization. Balancing the Aspects of Technology and Business during the Design Process. Doctoral thesis, Department of Machine Design, Royal Institute of Technology, Stockholm, Sweden.

Blanchard, B. S., Fabrycky, W. J. (1981). Systems Engineering and Analysis. Englewood Cliffs, New Jersey; Prentice-Hall Inc.

Blessing, L. T. M., Chakrabati, A., Wallace, K. M. (1998). An Overview of Descriptive Studies in Relation to a General Design Research Methodology. In Frankenberg, E., Badke-Schaub, P., Birkhofer, H., eds., Designers: The Key to Successful Product Development. Springer, pp. 42-56.

Bowen, J., Bahler, D. (1991). Conditional Existence of Variables in Generalized Constraint Networks. Ninth National Conference on Artificial Intelligence (AAAI-91), pp. 215-220. [pdf]

Braha, D., Maimon, O. (1997). The Design Process: Properties, Paradigms, and Structure. IEEE Transactions on Systems, Man, and Cybernetics – part A: Systems and Humans, Vol. 27, No. 2, March 1997, pp. 146-166. [pdf]

Braha, D., Reich, Y. (2003). Topological Structures for Modeling Engineering Design Processes. Research in Engineering Design 14 (2003) 185-199. [pdf]

Buckley, M. J., Fertig, K. W., Smith, D. E. (1992). Design Sheet: An Environment for Facilitating Flexible Trade Studies during Conceptual Design. In AIAA 92-1191 Aerospace Design Conference, February, Irvine, California.

Buur, J. (1990). A Theoretical Approach to Mechatronics Design. Dissertation, Institute for Engineering Design, Lyngby, Technical University of Denmark, 1990.

Checkland, P. (1981). Systems Thinking, Systems Practice. Chichester: John Wiley and Sons.

Claesson, A., Bengtsson, B-O. (2004). Towards a Configurable Manufacturing System Model. In Proceedings of the 5th international symposium on Tools and Methods for Competitive Engineering – TMCE2004, April 12-16, 2004, Lausanne, Switzerland, Eds. Horvath, I., Xirouchakis, P., Vol. 2, Millipress, Rotterdam, pp. 753-763. [paper ?]

Claesson, A., Gedell, S. (2003). Product Description Using Configurable Components. Proceedings of ICED’03. International Conference on Engineering Design, Stockholm, August 19-21, 2003. [paper ?]

Claesson, A., Johannesson, H. (2006) Integrated and configurable product and manufacturing models. International Design Conference, May 15-18, Dubrovnik, Croatia. [paper ?]

Claesson, A., Johannesson, H., Gedell, S. (2001). Platform Product Development: Product Model. A System Structure Composed of Configurable Components. Proceedings of DETC’01. ASME 2001 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Pittsburgh, Pennsylvania, September 9-12, 2001. Paper No. DETC2001/DTM-21714. [paper ?]

Claesson, A., Rosvall, B., Johannesson, H. (2005) Capturing design knowledge of robust designs using configurable components. Proceedings of IDETC/CIE, ASME International Design Engineering Technical Conferences & Computers in Engineering Conference, September 24-28, Long Beach, California, USA. [paper ?]

Clifton, R., Simmons, J. (eds.) (2004). Brands and Branding. The Economist, Bloomberg Press.

Cochran, D. S. (1999). The Production System Design and Deployment Framework. SAE Technical Paper Series1999-01-1644. [pdf]

Cochran, D. S., Arinez, J. F., Duda, J. W., Linck, J. (2001). A Decomposition Approach for Manufacturing System Design. CIRP - Journal of Manufacturing Systems. [pdf]

Codd, E. F. (1979). Extending the Database Relational Model to Capture More Meaning. ACM Transactions on Database Systems, Vol. 4, No. 4, December 1979, p. 397-434.

De Lit, P., Danloy, J., Delchambre, A., Henrioud, J-M. (2003). An Assembly-oriented Product Family Representation for Integrated Design. IEEE Transactions on Robotics and Automation, Vol. 19, No. 1, February. [pdf]

De Lit, P., Delchambre, A., Henrioud, J-M. (2003). An Integrated Approach for Product Family and Assembly System Design. IEEE Transactions on Robotics and Automation, Vol. 19, No. 2, April. [pdf]

Duffy, A. H. B., Andreasen, M. M. (1995). Enhancing the Evolution of Design Science. Proceedings of ICED’95, Prague, August 22-24.

Erens, F. J. (1996). The Synthesis of Variety. Developing Product Families. Thesis, Technische Universiteit, Eindhoven, Netherlands.

Erixon, G. (1998). Modular Function Deployment – A Method for Product Modularization. Doctoral thesis, Royal Institute of Technology, Stockholm, Sweden.

Erixon, G., Erlandsson, A., von Yxkull, A., Östgren, B. M. (1994). Modulindela produkten – halverade ledtider och offensive marknadsföring. Sveriges Verkstads-industrier.

Fagerström, J., Aganovic, D., Nielsen, J., Falkman, P. (2002). Multi-viewpoint Modeling of the Innovation System – Using a Hermeneutic Method. Proceedings of ICAD2002, Second International Conference on Axiomatic Design, Cambridge, MA, June 10-11. [pdf]

Freeman-Benson, B. N., Maloney, J., Borning, A. (1990). An Incremental Constraint Solver. Communications of the ACM, January, Vol. 33. No. 1. [pdf]

Falkman, P. (2005). Specification of Resource Allocation Systems. A STEP Towards a Unified Framework. Doctoral thesis, Department of Signals and Systems, Chalmers University of Technology, Göteborg, Sweden.

Fricke, E., Gebhard, B., Negele, H., Igenbergs, E. (2000). Coping with Changes: Causes, Findings, and Strategies. Systems Engineering, Vol. 3, No. 4, pp. 169-179, John Wiley & Sons, Inc. [pdf]

Fricke, E., Schultz, A. P. (2005). Design for Changeability (DfC): Principles to Enable Changes in Systems Throughout Their Entire Lifecycle. Systems Engineering, Vol. 8, No. 4, pp. 342-359, Wiley Periodicals, Inc. [pdf]

Gero, J. S., Kannengiesser, U. (2003). Towards a Framework for Agent-based Product Modelling. International Conference on Engineering Design (ICED 03), August 19-21, Stockholm, Sweden. [pdf]

Gershenson, J. K., Prasad, G. J., Zhang, Y. (2003). Product Modularity: Definitions and Benefits. Journal of Engineering Design, Vol. 14, No. 3, September 2003, pp 295-313. [pdf]

Guba, E., Lincoln, Y. S. (1989). Fourth Generation Evaluation. Sage Publications, Inc., Newbury Park, CA, USA.

Hami-Nobari, S., Blessing, L. (2005). Effect-oriented Description of Variant Rich Products. Proceedings of the International Conference on Engineering Design (ICED), August 15-18, Melbourne, Australia. [pdf]

Hansen, B.L, Riis, J., Hvam, L. (2003). Specification Process Reengineering: Concepts and Experiences from Danish industry. Department of Manufacturing Engineering and Management, Technical University of Denmark.

He, D. W., Kusiak, A. (1997). Design of Assembly Systems for Modular Products. IEEE Transactions on Robotics and Automation, Vol. 13, No. 5, October, 1977. [pdf]

He, D. W., Kusiak, A. (1998). Designing an Assembly Line for Modular Products. Computers in Engineering, Vol. 34, No. 1, pp. 37-52. [pdf]

He, D. W., Kusiak, A., Tseng, T-L. (1998). Delayed Product Differentiation: A Design and Manufacturing Perspective. Computer-Aided Design, Vol. 30, No. 2, pp. 105-113. [pdf]

Heron, J. (1981). Philosophical Basis for a New Paradigm. In: Reason, P, Rowan, J., (eds.), Human inquiry: A Sourcebook of New Paradigm Research. Chichester, UK: John Wiley.

Hitchins, D. K. (2003). Advanced Systems – Thinking, Engineering, and Management. Artech House Inc., Norwood, MA, USA.

Huang, C-C., Kusiak, A. (1998). Modularity in Design of Products and Systems. IEEE Transactions on Systems, Man, and Cybernetics – Part A: Systems and Humans, Vol. 28, No. 1, January, 1998. [pdf]

Hubka, V., Eder, W. E. (1988). Theory of Technical Systems – A Total Concept Theory for Engineering Design. Springer-Verlag.

Jarzabek, S., Basset, P., Zhang, H., Zhang, W. (2003). XVCL: XML-based Variant Configuration Language. IEEE, Proceedings of the 25th International Conference on Software Engineering (ICSE’03). [pdf]

Jensen, T. (1999). Functional Modeling in a Design Support System – Contribution to a Designer’s Workbench. Doctoral thesis, Department of Control and Engineering Design, Technical University of Denmark, Copenhagen.

Johannesson, H. (1996). On the Nature and Consequences of Functional Couplings in Axiomatic Machine Design. In Proceedings of ASME ’96, DETC/DTM-1528, Irvine, CA, August.

Johannesson, H., Claesson, A. (2002). Systematic Product Platform Design. A Combined Function-Means and Parametric Modeling Approach. Journal of Engineering Design, Vol. 16, No. 1, February 2005, pp. 25-43. [pdf paper ?]

Jörgensen, K. A. (1992). Paradigms for Research Work. Instituttet for Produktion, AUC Denmark (lecture note in Danish).

Kannengiesser, U., Gero, J. (2005). Understanding situated design agents. In Bhatt, A. (ed.), CAADRIA’05, Vol. 2, TVB, New Delhi, pp. 277-287. [pdf]

Kikuchi, M., Nagasaka, I. (2002). On the Three Axioms of General Design Theory. Proceedings of the International Workshop of Emergent Synthesis '02, pp. 69-76. [pdf]

Kikuchi, M., Nagasaka, I. (2003). On the Three Forms of Non-deductive Inferences: Induction, Abduction, and Design. In Proceedings of Applied Informatics (AI 2003), February 10-13, Innsbruck, Austria. [pdf]

Kikuchi, M., Nagasaka, I. (2003). Situation Theoretic Analysis of Functions for a Formal Theory of Design. Proceedings of the International Conference on Engineering Design (ICED), Stockholm, August 19-21. [pdf]

Kitamura, Y., Mizoguchi, R. (2004). Ontology-based Systematization of Functional Knowledge. Journal of Engineering Design, Vol. 15, No. 4, pp. 327-351. [pdf]

Kitamura, Y., Kashiwase, M., Fuse, M., Mizoguchi, R. (2004). Deployment of an Ontological Framework of Functional Design Knowledge. To be published in Advanced Engineering Informatics. [pdf]

Kockler, F. R., Withers, T. R., Poodiack, J. A., Gierman, M. J. (eds.) (1990). Systems Engineering Management Guide. Defense Systems Management College, Washington, USA.

Kokkolaras, M., Fellini, R., Kim, H. M., Michelena, N. F., Papalambros, P. Y. (2002). Extension of the Target Cascading Formulation to the Design of Product Families. Struct Multidisc Optim, 24, 293-301, Springer-Verlag. [pdf]

Kolb, D. A. (1984). Experiential Learning. Experience as the Source of Learning and Development. Prentice Hall, New Jersey, 1984.

Kormeier, T., Rudolph, S. (2005). On Self-similarity as a Design Paradigm. Proceedings of ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 24-28, Long Beach, California, USA. [pdf]

Lin, L., Chen, L-C. (2002). Constraints Modeling in Product Design. Journal of Engineering Design, Vol. 13, No. 3, pp. 205-214. [pdf]

Martin, M. V., Ishii, K. (1997). Design for Variety: Development of Complexity Indices and Design Charts. Proceedings of ASME Design Engineering Technical Conference, September 14-17, Sacramento, CA. [pdf]

Mesihovic, S. (2004). On the Development and Sales-delivery Process of Configurable Products. Licentiate Thesis, Division of Product Development, Department of Mechanical Engineering, Chalmers University of Technology, Göteborg, Sweden.

Mesihovic, S., Malmqvist, J. (2004). A Process-oriented Approach for Management of Product Configuration Models. Proceedings of ASME International DETC/CIE, Salt Lake City, Utah, USA.

Michalek, J.J., Ceryan, O., Papalambros, P.Y., Koren, Y. (2005). Manufacturing Investment and Allocation in Product Line Design Decision-making. Proc. IDETC/CIE, ASME, 2005, Long Beach, CA, US. [pdf]

Michelena, N., Papalambros, P. (1997). A Hypergraph Framework for Optimal Model-Based Decomposition of Design Problems. Computational Optimization and Applications, Vol. 8, No. 2, September, pp. 173-196.[pdf]

MIL-STD-499A (1974). Engineering Management. 1 May 1974.

Mittal, S., Frayman, F. (1989). Towards a Generic Model of Configuration Tasks. In Proceedings of IJCAI 89, pp. 1395-1401.

Mortensen, N. H. (1999). Design Modelling in a Designer’s Workbench – Contribution to a Design Grammar. Doctoral Thesis, Department of Control and Engineering Design, Technical University of Denmark.

Männistö, T., Peltonen, H., Sulonen, R. (1995). Open Data Modelling Issues in Product Configuration. Detailed abstract. [pdf]

Männistö, T., Peltonen, H., Soininen, T., Sulonen, R. (2001a). Multiple Abstraction Levels in Modelling Product Structures. Data & Knowledge Engineering, Vol. 36, 2001, Elsevier Science B.V. [pdf]

Mörup, M. (1993). Design for Quality. Doctoral Thesis, Institute for Engineering Design, Technical University of Denmark, Lyngby.

Nilsson, P.(2004). Managing Requirements in a Design Support System. A Product Modeling Approach. Doctoral Thesis, Division of Product and Production Development, Chalmers University, Göteborg, Sweden.

Olesen, J. (1992). Concurrent Development in Manufacturing – Based on Dispositional Mechanisms. Dissertation, Institute of Engineering Design, Technical University of Denmark, 1992.

Olsson, K. G. F. (1976). Systematisk konstruktion. Doktorsavhandling, Institutionen för maskinkonstruktion, Lunds Tekniska Högskola. (In Swedish)

O’Sullivan, B. (1999). Constraint-Aided Conceptual Design. London: Professional Engineering, 2002. – Also: University College Cork, Dept. of Computer Science, dissertation, 1999. [pdf]

O’Sullivan, B. (2002). Interactive Constraint-aided Conceptual Design. AI-EDAM, Vol. 16, No. 4, pp. 303-328. [pdf]

Pahl, G., Beitz, W. (1996). Engineering Design. A Systematic Approach. 2nd Ed., Springer-Verlag, London, 1996.

Pedersen, K., Emblemsvåg, J., Bailey, R., Allen, J. K., Mistree, F. (2000). Validating Design Methods & Research: The Validation Square. Proceedings of DETC’00, 2000 ASME Design Engineering Technical Conferences, September 10-14, 2000, Baltimore, Maryland. [pdf]

Pine, B. J. II (1993). Mass Customization - The New Frontier in Business Competition. McGraw-Hill

Porras, J. L., Robertson, P. J. (1992). Organizational Development: Theory, Practice, and Research. In M. D. Dunnette & L. M. Hough (Eds.), Handbook of Industrial and Organizational Psychology. (2nd ed., Vol. 3), Palo Alto, California: Consulting Psychologists Press.

Potter, S., Culley, S. J., Darlington, M. J., Chawdhry, P. K. (2003). Automatic Conceptual Design using Experience-derived Heuristics. Research in Engineering Design 14 (2003) 131-144. [pdf]

Qiao, G., McLean, C., Riddick, F. (2002). Simulation System Modeling for Mass Customization Manufacturing. Proceedings of the 2002 Winter Simulation Conference, Yücesan, E., Chen, C-H., Snowdon, J. L., Charnes, J. M. (eds.). [pdf]

Reason, P. (1994). Three Approaches to Participative Inquiry. In Denzin, N. K., Lincoln, Y. S., Handbook of Qualitative Research. London: Sage Publications, 1994.

Reddy, S. Y., Fertig, K. W., Smith, D. E. (1996). Constraint Management Methodology for Conceptual Design Tradeoff Studies. In: Proceedings of the 1996 ASME Design Engineering Technical Conferences and Computers in Engineering Conference, August, Irvine, California. [pdf]

Robertson, D., Ulrich, K. (1998). Planning for Product Platforms. Sloan Management Review, Summer, 39, 4, pp. 19-31. [pdf]

Rodgers, P. A., Huxor, A. P., Caldwell, N. H. M. (1999). Design Support using Distributed Web-based AI Tools. Research in Engineering Design, No. 11, pp. 31-44. [pdf]

Roozenburg, N. F. M., Eekels, J. (1995). Product Design: Fundamentals and Methods. Delft University of Technology, The Netherlands, John Wiley & Sons.

Rosenman, M. A., Gero, J. S. (1998). Purpose and Function in Design: From the Socio-cultural to the Techno-physical. Design Studies, 19(2):161-186.

Sabin, D., Freuder, E. C. (1996). Configuration as Composite Constraint Satisfaction. In: Proceedings of the (1st) Artificial Intelligence and Manufacturing Research Planning Workshop, AAAI Press. [pdf]

Sabin, D., Weigel, R. (1998). Product Configuration Frameworks – A Survey. IEEE Intelligent Systems, 13(4):42-49, July/August. [pdf]

Sage, A. P., Armstrong, J. E. Jr. (2000). Introduction to Systems Engineering. John Wiley & Sons Inc., New York, USA.

Sannella, M. J., Maloney, J., Freeman-Benson, B., Borning, A. (1993). Multi-way versus One-way Constraints in User Interfaces: Experience with the DeltaBlue Algorithm. Software – Practice and Experience, Vol. 23, No. 5, May, pp. 529-566. Preprint published as UW Tech Report 92-07-05. [pdf]

Sannella, M. J. (1994). Constraint Satisfaction and Debugging for Interactive User Interfaces. Doctoral Thesis, Department of Computer Science and Engineering, University of Washington, August 1994. Revised version published as UW Tech Report 94-09-10. [pdf]

<>Sannella, M. J. (1995). The SkyBlue Constraint Solver and Its Applications. In: Vijay Saraswat and Pascal van Hentenryck (eds), Principles and Practice of Constraint Programming: The Newport Papers, MIT Press, 1995. [pdf]

Schachinger, P., Johannesson, H. (2000). Computer Modelling of Design Specifications. Journal of Engineering Design, Vol. 11, Issue 4, 2000.

Serrano, D. (1987). Constraint Management in Conceptual Design. Doctoral Thesis, October, Massachusetts Institute of Technology (MIT), Boston, USA.

Shah, J., Brown, D., Finger, S., Hazelrigg, G., Mistree, F., Sobieski, J. (1996). Research Opportunities in Engineering Design. NSF Strategic Planning Workshop Final Report (Washington, DC: National Science Foundation).

Simpson, T. W., Siddique, Z., Jiao, J. (2006). Product Platform and Product Family Design – Methods and Applications. Springer.

Sohlenius, G. (2005). Systemic Nature of the Industrial Innovation Process, Contribution to a Philosophy of Industrial Engineering, Doctoral Thesis, Tampere University, Finland. [pdf]

Sommerville, I. (2001). Software Engineering. 6th ed., Addison-Wesley.

Stake, R. B. (2000). On Conceptual Development of Modular Products. Development of Supporting Tools for the Modularization Process. Doctoral Thesis, Division of Assembly Systems, Department of Production Engineering, Stockholm, Sweden.

Suh, N. P. (1990). The Principles of Design. New York: Oxford University Press.

Svensson, D. (2003). Towards Product Structure Management in Heterogeneous Environments. Doctoral Thesis, Engineering and Industrial Design, Department of Product and Production Development, Chalmers University of Technology, Göteborg, Sweden.

Söderberg, R., Johannesson, H. (1998). Spatial Incompatibility – Part Interaction and Tolerance Allocation in Configuration Design. Proceedings of the ASME conference DETC’98, Atlanta, USA.

Tate, D. (1999). A Roadmap for Decomposition Activities, Theories, and Tools for System Design. Doctoral Thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, USA. [pdf]

Tsubone, H., Horikawa, M. (1999). Impact of Various Flexibility Types in a Hybrid Fabrication/Assembly Production System. International Journal of Production Economics, No. 60-61, pp. 117-123. [pdf]

Turesson, B. (2006). PLM from a Holistic Business Perspective. Proceedings of the 1st Nordic Conference on Product Lifecycle Management. Malmqvist & Berglund (eds.), January 25-26, Göteborg, Sweden. [pdf]

Ullman, D. G. (1997). The Mechanical Design Process. 2nd ed., McGraw-Hill.

Ulrich, K., Tung, K. (1991). Fundamentals of Product Modularity. Issues in Design/Manufacture Integration, Sharon, A., (ed.), New York: ASME, 1991, pp. 73-79.

Wang, H., Roy, U. (2005). A Graph-based Method for Mechanical Product Family Modeling and Functional Tolerancing. Proceedings of ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 24-28, Long Beach, California, USA. [pdf]

van Veen, E. A. (1990). Modeling Product Structures by Generic Bills-Of-Material. Doctoral Thesis, TU Eindhoven, the Netherlands.

von Corswant, F. (2003). Organizing Interactive Product Development. Doctoral Thesis, Department of Operations Management and Work Organization, School of Technology Management and Economics, Chalmers University of Technology, Göteborg, Sweden.

Wallén, G. (1996). Vetenskapsteori och forskningsmetodik. Studentlitteratur.

Warell, A. (2001). Design Syntactics: A Functional Approach to Visual Product Form – Theory, Models and Methods, Doctoral Thesis, Department of Product and Production Development, Chalmers University of Technology, Göteborg, Sweden.

Wellman, M. P. (1995). A Computational Market Model for Distributed Configuration Design. Artificial Intelligence for Engineering Design, Analysis, and Manufacturing (AI EDAM), No. 9, pp. 125-133. [pdf]

Wilhelms, S. (2005). Constraint-based Conceptual Design using Principle Solution Elements. Doctoral Thesis, Department of Mechanical Engineering, Linköpings Universitet, Linköping, Sweden.

Yin, R. K. (1994). Case Study Research: Design and Methods. 2nd edition, Sage Publications, Thousand Oaks, CA, USA.

Zha, X. F., Du, H. (2001). An Integrated Representational Model for Concurrent Assembly Design and Planning. Proceedings of 4th IEEE International Symposium on Assembly and Task Planning, Soft Research Park, Fukuoka, Japan, May 28-29. [pdf]

Zhang, H., Jarzabek, S. (2003). An XVCL Approach to Handling Variants: A KWIC Product Line Example. IEEE Proceedings of the 10th Asia-Pacific Software Engineering Conference (APSEC’03). [pdf]

Zimmerman, T. (2005). Information Management for Mechatronic Products. Focusing on Information Modeling Aspects. Licentiate thesis, Department of Product and Production Development, Göteborg, Sweden.

Östgren, B. M. (1994). Modularised Product – Effects Throughout the Whole Company. (Modulindelad product – effekter i hela företaget). Licentiate Thesis, Royal Institute of Technology, Stockholm, Sweden.



Go to the table of contents.